Two windows on a Hertford frontage can appear identical from the road while having different reveal depths, sloping cills or uneven plaster inside. Point out those differences during the survey. Ask where the new frames will sit in the openings and how much trim will be visible. If there are existing shutters or a deep internal cill, show how they are used and check whether they can stay.
Decide how much historic detail to carry through
Compare the meeting rail, horns and glazing bars on the old sashes with a drawing of the replacements. A squared corner can help reproduce the look of painted joinery, while a narrow bar may preserve more visible glass. Inspect samples near the brick or render and discuss any restrictions on exterior changes before agreeing the final design or frame material.
Ask how the installer will tackle draughts
A window that feels cold may have gaps around the reveal as well as an older glass unit. Show the surveyor where you feel air movement or have seen marks around the frame. Ask how the installer will seal and finish the perimeter and how the specification will provide background ventilation. For comfort, compare the whole-window U-value of the proposed units. If you are upgrading multiple areas of your home, we also supply and fit energy-efficient uPVC windows throughout Hertford.
Discuss noise, privacy and daily care
A sash facing a busy route may benefit from a discussion about acoustic glass, whereas a bathroom may need an obscure pane. Test the lifts, catches and any tilt-in mechanism that will make cleaning easier. Check what clearance is available indoors. Confirm how to use any opening restrictor if one is specified, and make sure your agreed hardware is included on the written quote.
Confirm how the fitter will preserve the reveals
Ask which surfaces will need cutting back or removing before fitting, and whether the old frame has been measured against masonry or against an applied trim. That can affect the amount of visible sash and the amount of making good required. Make sure the quote states who is responsible for patching the area after the new frame is installed.
If the opening has been altered over time, use the site survey to find out what is concealed. Agree how the installer will handle an unexpected issue after the old window comes out, especially where you want to retain shutters or a decorative board.
Use handover to inspect the whole job
Before fitting, agree which old trims and cills will be retained, what surfaces will be made good and who will remove the old frames. Afterwards, operate every sash and look at the seals around the opening inside and outside. Keep care and warranty documents with the survey drawings. If another opening needs work later, the saved details can help match its finish and rail positions. Our FENSA-registered fitters also carry out bespoke uPVC sash windows in Hertfordshire and surrounding neighbourhoods.
What to confirm before ordering
- A drawing showing the frame position in the reveal
- Agreement on which cills, trims or shutters stay
- The perimeter sealing and finishing plan on the quote





